Bostitch 21° Galvanised Ring Shank Stick Nails 2.8 x 65mm (Pack 2000)
Description
These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads.
Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.
Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
65 mm Galvanised Ring round head nails.
Type : Ring.
Head Width : 2.8 mm.
Length : 65 mm.
Pack : Box of 2000 nails.
Specifications
Catalog Page Number
582
Brand
Bostitch
Categories
Power Tool Accessories
Category
Nailing & Stapling Accessories
Country of Origin
Germany
Finish
Galvanised
Form
Ring Nails
Manufacturer
Bostitch
Pack Size
2000
Size
2.80x65mm
Type
Nailing & Stapling Accessories
selection not available, try a different combination
selection not available, try a different combination
Compare